Wet Glaze (removed with a rag/brush):
Start with 20% ELBDG Dry Glaze Binder and add up to 5% ELBRC Binder for Glaze Adhesion, add up to 10% ELTINT Micronized Pigment, add water to bring the total mix balance to 100% Sand surface with 320 grit or marroon scotch brite prior to applying the wet glaze, use a rag or brush to remove the majority before it dries.
Wet glaze can be applied by spray or by hand-wiping and is then immediately removed by wiping with a rag or by brushing with a paint brush to give an antiquing effect.
Dry time, before scuffing off: Immediately
Time to Overcoat: 2 hours
Suitable Topcoats: Depends on system used, but usually EL300xx or EL500xx over solid colours and EL100xx over itself in a stained system
| Wet Glaze % | All SPECIES |
|---|---|
| WATER | 60-65 |
| ELBDG | 20 |
| ELBRC | Up to 5 |
| ELTINT | Up to 10 |