Envirocryl 400 White Topcoat
Safety Data Sheet
According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 and the Hazardous Products Regulations (HPR) WHMIS 2015
Date of issue: 09/03/2019 Revision date: 09/03/2019 Version: 1.0
SECTION 1: Identification
1.1. Identification
Product form
Product name
Product code
: Mixture
: Envirocryl 400 White Topcoat
: ELACW400XX
1.2. Relevant identified uses of the substance or mixture and uses advised against
Recommended use
: Wood coating
1.3. Details of the supplier of the safety data sheet
Manufacturer
Performance Finishing Solutions
4800 Eastgate Parkway
Units 3 & 4
Mississauga, L4W 3W6 – Canada
T 905-629-7007
1.4. Emergency telephone number
Emergency number
: 800-239-3824 (8AM – 5PM)
SECTION 2: Hazard identification
2.1. Classification of the substance or mixture
GHS classification
Not classified.
2.2. Classification of the substance or mixture
GHS labelling
No labelling applicable
2.3 Other Hazards
No additional information available
2.4 Unknown acute toxicity
Not applicable
SECTION 3: Composition/information on ingredients
3.1 Unknown acute toxicity
Not applicable
3.2 Mixtures
*Chemical name, CAS number and/or exact concentration have been withheld as a trade secret
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures after inhalation : If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical advice/attention if you feel unwell.
First-aid measures after skin contact : If skin irritation occurs: Wash skin with plenty of water. Obtain medical attention if irritation persists.
First-aid measures after eye contact : IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
First-aid measures after ingestion : Do not induce vomiting without medical advice. Never give anything by mouth to an unconscious person. Get medical advice/attention if you feel unwell.
4.2. Most important symptoms and effects, both acute and delayed
Symptoms/effects after inhalation : May cause irritation to the respiratory tract.
Symptoms/effects after skin contact : May cause skin irritation. Repeated exposure may cause skin dryness or cracking
Symptoms/effects after eye contact : May cause eye irritation. Symptoms may include discomfort or pain, excess blinking and tear production, with possible redness and swelling.
Symptoms/effects after ingestion : May be harmful if swallowed. May cause gastrointestinal irritation, nausea, vomiting and diarrhea.
4.3. Indication of any immediate medical attention and special treatment needed
Symptoms may be delayed. In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
SECTION 5: Fire-fighting measures
5.1. Extinguishing media
Suitable extinguishing media : Use extinguishing media appropriate for surrounding fire.
Unsuitable extinguishing media : None Known
5.2. Special hazards arising from the substance or mixture
Fire hazard : Products of combustion may include, and are not limited to: oxides of carbon.
5.3. Advice for firefighters
Protection during firefighting : Keep upwind of fire. Wear full fire fighting turn-out gear (full Bunker gear) and respiratory protection (SCBA).
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
General measures : Use personal protection recommended in Section 8. Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
6.1.1. For non-emergency personnel
No additional information available
6.1.2. For emergency responders
No additional information available
6.2. Environmental precautions
Prevent entry to sewers and public waters.
6.3. Methods and material for containment and cleaning up
For containment : Absorb and/or contain spill with inert material (sand, vermiculite or other appropriate material), then place in suitable container. Do not flush into surface water or sewer system. Wear recommended personal protective equipment.
Methods for cleaning up : Sweep or shovel spills into appropriate container for disposal. Provide ventilation.
6.4. Reference to other sections
For further information refer to section 8: “Exposure controls/personal protection”
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling : Avoid contact with skin and eyes. Avoid breathing dust/fume/gas/mist/vapours/spray. Do not swallow. Handle and open container with care. When using do not eat, drink or smoke.
Hygiene measures : Wash contaminated clothing before reuse. Always wash hands after handling the product.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions : Keep out of the reach of children. Keep container tightly closed. Store in a dry, cool and well- ventilated place. Protect from freezing. Keep out of direct sunlight.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
8.2. Exposure controls
Appropriate engineering controls :
Hand protection :
Eye protection :
Skin and body protection :
Respiratory protection :
Environmental exposure controls :
Other information:
Ensure good ventilation of the work station.
Wear suitable gloves.
Wear safety glasses or goggles if handling large quantities.
Wear suitable protective clothing.
None necessary under normal conditions of use. In case of insufficient ventilation, wear suitable respiratory equipment. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator.
Avoid release to the environment.
Handle in accordance with good industrial hygiene and safety procedures. Do not eat, drink or smoke when using this product.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state:
Appearance:
Colour:
Odour:
Odour threshold:
pH:
Melting point:
Freezing point:
Boiling point:
Flash point:
Relative evaporation rate (butylacetate=1):
Flammability (solid, gas):
Vapour pressure:
Relative vapour density at 20 °C (68 °F):
Relative density:
Solubility:
Partition coefficient n-octanol/water:
Auto-ignition temperature:
Decomposition temperature:
Viscosity, kinematic:
Viscosity, dynamic:
Explosive limits:
Explosive properties:
Oxidising properties:
Liquid
White Opaque Liquid
White
Mild
Not applicable
7-9
Not applicable
0 °C (32 °F)
100 °C (212 °F)
100 °C (> 212 °F), closed cup
No data available
Not flammable
No data available
No data available
1.04
Soluble in water
No data available
No data available
No data available
No data available
700 cps
Lower explosive limit (LEL): Not applicable
Upper explosive limit (UEL): Not applicable : No data available
No data available
No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
No dangerous reactions known under normal conditions of use.
10.2. Chemical stability
Stable under normal conditions.
10.3. Possibility of hazardous reactions
No dangerous reactions known under normal conditions of use.
10.4. Conditions to avoid
Heat.
10.5. Incompatible materials
None known.
10.6. Hazardous decomposition products
May include, and are not limited to: oxides of carbon.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity (oral):
Acute toxicity (dermal):
Acute toxicity (inhalation):
Skin corrosion/irritation:
Serious eye damage/irritation:
Respiratory or skin: sensitisation:
Germ cell mutagenicity:
Carcinogenicity:
Not classified
Not classified
Not classified
Not classified
pH:7 – 9
Not classified
pH:7 – 9
Not classified
Not classified
Not classified
Silica, amorphous (7631-86-9)
IARC group
3 – Not classifiable
Reproductive toxicity
STOT-single exposure
STOT-repeated exposure
Aspiration hazard
Symptoms/effects after inhalation
Symptoms/effects after skin contact
Symptoms/effects after eye contact
Symptoms/effects after ingestion
Other information
Not classified
Not classified
Not classified
Not classified
May cause irritation to the respiratory tract.
May cause skin irritation. Repeated exposure may cause skin dryness or cracking.
May cause eye irritation. Symptoms may include discomfort or pain, excess blinking and tear production, with possible redness and swelling.
May be harmful if swallowed. May cause gastrointestinal irritation, nausea, vomiting and diarrhea.
Likely routes of exposure: ingestion, inhalation, skin and eye.
SECTION 12: Ecological information
12.1. Toxicity
Ecology – general:
May cause long-term adverse effects in the aquatic environment.
12.2. Persistence and degradability
Envirocryl 400 White Topcoat
Persistence and degradability
Not established.
12.3. Bioaccumulative potential
Envirocryl 400 White Topcoat
Bioaccumulative potential
Not established.
12.4. Mobility in soil
No additional information available
12.5. Other adverse effects
Other information:
No other effects known.
SECTION 13: Disposal considerations
13.1. Waste treatment methods
Product/Packaging disposal recommendations:
Dispose in a safe manner in accordance with local/national regulations. Recycle empty containers where allowed.
SECTION 14: Transport information
Department of Transportation (DOT) and Transportation of Dangerous Goods (TDG)
In accordance with DOT/TDG
Not regulated
SECTION 15: Regulatory information
15.1. Federal regulations
All components of this product are listed, or excluded from listing, on the United States Environmental Protection Agency Toxic Substances Control Act (TSCA) inventory.
All components of this product are listed, or excluded from listing, on the Canadian DSL (Domestic Substances List) and NDSL (Non-Domestic Substances List) inventories.
15.2. International regulations
No additional information available
15.2. International regulations
California Proposition 65 – This product does not contain any substances known to the state of California to cause cancer, developmental and/or reproductive harm
SECTION 16: Other information
Revision date:
Other information:
Prepared by:
09/03/2019
None.
Nexreg Compliance Inc.
www.Nexreg.com
Disclaimer: We believe the statements, technical information and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind. The information contained in this document applies to this specific material as supplied. It may not be valid for this material if it is used in combination with any other materials. It is the user’s responsibility to satisfy oneself as to the suitability and completeness of this information for the user’s own particular use.